Build your own system

Select your Boat Specs

Try the configurator below to build your own Battery Management system customized to your boat specifications. When you are done, you will get a flowchart of your installation that you can print, download or e-mail.

Select inputs valid for your specific boat…

These are the components you need

0

Battery Control Modules

Battery Control Module

Basically the system consists of one or more BCM-units to which batteries and power consuming devices are connected. Batteries may be start- or consumer batteries. power consumers may be start motors, instruments, bow thrusters and different accessories. The battery supply switches for the consumers can be operated locally on the BCM, via the Battery Management Display or via an external button panel.

Technical outputs
Weight 4.3 kg
Dimensions (W x D x H) 360 x 98 x 255 mm
Supply Voltage 4-32V
Power Consumption – Awake < 6W
Current Consumption – Asleep < 1mA
Operating Temp -30°C ≤ T ≤ 85°C
Storage Temp -30°C ≤ T ≤ 85°C
0

Battery Management Displays

2.5″ Battery Display

Remote battery control and information for up to four drivelines and 12 different battery groups can be presented. The menus are dynamic depending on the installation. Information about the battery’s voltage as well as menus for battery control and settings are shown as standard.

Technical outputs
Weight 82 g
Dimensions (W x D x H) 78 x 62 x 50 mm
Screen size 2.5″
Supply Voltage 6-32 V
Electrical Protection IEC 60529 (IP5K6)
Compass Safe Distance 30 cm, IEC 60945
0

Battery Sensor

Battery Sensor

The Battery Sensor monitors battery charge, status, current and voltage. Measured values are shown in the Battery Management Display. The battery sensor is dimensioned for up to 300 A load

Technical outputs
Weight 225 g
Dimensions (W x D x H) Approx. 115 x 27 x 83 mm
Supply Voltage 6-32 V
Power Consumption – Awake 15 mA
Current Consumption – Asleep <200 µA
Max Current +- 1500 A for 3s
0

e-Key Remote Kit

e-Key Remote Kit

The e-Key Remote Kit contains of one e-Key and one e-key Reciever. The e-Key locks and unlocks the boat’s electrical system and turns on the engine’s ignition via the e-Key Remote Receiver.

Technical outputs for the e-Key Remote Kit
Weight 221 g
Dimensions (W x D x H) 185 x 41 x 135 mm
Supply Voltage 6-32 V
Power Consumption – Awake 49mA (12 V)
Current Consumption – Asleep 5mA (12 V)
Radio Frequencies 433MHz/313MHz
0

extra e-Keys

The e-Key

Te-Key Remote locks and unlocks the boat’s electrical system and turns on the engine’s ignition via the e-Key Remote Receiver. The key has two buttons that control relays to optional functions such as deck light or anchor winches.

Technical outputs for the e-Key
Weight 26 g
Dimensions (W x D x H) 38 x 14 x 70 mm
Supply Voltage 3V (Battery CR2032)
Range (Optimal conditions) 100 m
Radio Frequencies 433MHz/313MHz

Here is your configuration

Image of your configuration